Custom Search

BONSAI SLANTING STYLE

Diposting oleh cettasahwa | 14.47 | , | 0 komentar »


I. GENERAL

A. The slanting style bonsai is one of several styles of bonsai which  have  relatively upright trunks.
 B.  The slanting style bonsai depicts a tree in nature which
 1.  May have been pushed over at an angle by a fallen tree, by a snow or rock slide, or by other environmental  factors.
 2.  May have grown in a harsh environment of wind- torn shorelines  or rugged mountains where the winds generally come from a single direction. This windswept style tree may be the result of the wind alone or salt spray and/or  sand combined with the wind.
 3.  May have grown away from shade and toward the light.

C.  Slanting objects are inherently off balance. The slanting style bonsai achieves asymmetrical balance through branch placement.

II. SLANTING STYLE BONSAI DEFINED

A. The slanting style bonsai is one having either a straight or curved trunk with the apex above and to the left or to the right of the base of the trunk.
B.  Trunk
 1.  Is a slanted version of either a formal or informal upright trunk. It should either be straight or with well balanced curves.
2.   Emerges from the soil at an angle and which leans between 10 and 45 degrees from the vertical to either the left or right.
The degree of lean is arbitrary and is determined by your ability to maintain visual balance.

3.  Is tapered from a wide base to a narrow apex.

4.  The apex leans slightly toward the front. C.  Branches
1.  May be horizontal or angled downward.

2.  Are straight or curved to complement the style of the trunk.

3.  Located on both sides and on the rear. Side branches should generally be located on the outside of the trunk’s curves and be placed to counteract the lean.

D. Roots

Wire and position the roots so that the longer roots are on the side away from the lean.
 
E.  The container
1.  May be rectangular or oval.
2.  The tree is placed in the container so that it is offset toward the side away from the direction of the slant.

 
III. STYLING THE TREE

A. Roots

1.  Remove surface soil down to relatively thick radiating roots.
2.  There should be strong and mature surface roots to give a feeling of strength, stability and endurance.
3.  Strong roots should be apparent on the opposite side of the slant of the trunk to physically and aesthetically counter balance the lean of the tree. Wire and place roots as necessary.

B.  Trunk

1. Study the shape, curvature, defects, branch location and visual  movement of the trunk and decide upon the front to be used in styling the tree.
2.  Adjust the attitude (the angle at which the trunk emerges from the soil) so that it emerges at about a 25 ght rather than curved.
3. If the trunk is curved, the first curve should bend in the direction opposite from which the trunk leans. If at ground level the trunk leans toward the right, the first curve should bend back toward the left to reestablish the tree’s balance.
4.  The trunk may continue at a slant to the apex or it may turn upward. 

C.  Branches

1.   The lowest branch is the heaviest branch and should be on the opposite side of the slant of the trunk. This is necessary to counter balance the lean of the trunk. The tree should not appear to be about to topple over.
2.   The second branch is the next heaviest  branch and should usually project toward the rear to provide an  immediate  sense of depth.
3. The third branch is the third heaviest branch and extends in the direction of the lean.
4.  Branches extending away from the direction of the lean are usually longer than comparable ones on other style bonsai.
5.   Create the new apex either from an existing apex or by removing the old apex and wiring a front branch upright.
6.  Identify and style the remaining branches between the lower three and the apex.
7.  In a windswept bonsai

a.   The angle of the trunk and lines of the branches should be arranged to create a sense of direction, movement, rhythm  and  tension.
b.   The use of conifers is usually best.
c.   The foliage mass should be relatively sparse to assist in defining the branch structure. It should be kept trimmed and not allowed to become bushy and should be kept away from the trunk line.
d.  Branches may cross the trunk.
e.   Jin (dead apex) and shari (dead branch) are highly desirable.
f.    Planting in crescent shaped or shallow pots, on slabs or on rocks are usually best. These forms suggest an irregular coast line where prevailing winds have molded the tree.

IV. POTTING THE TREE

A. Prepare the correct size and style container and assemble the appropriate soil mix.
B.  Decide on the tree’s location in the pot.
1.  Position it in the container to the rear of the center line and either left or right of the center.
2.  In deciding whether to place it to the left or to the right consider the slant of the trunk. Position the tree so that the slanting side of the tree, the side in the direction of the slant, is above the largest soil area. If the tree slants to the right, plant it toward the left in the pot.
C.  Remove soil and roots from the rear and from the left or right side depending on placement.

Note : Details on potting are discussed in the chapter on formal upright  style  bonsai  and  will  not  be  repeated  here.

[+/-] more...